Skip to content
Currency: GBP, £ EUR, €
Find a Stockist 0

Contamination Removal Bar

image
image
image
image
image

Contamination Removal Bar

Our 100g Contamination Removal Bars are available in three different grades. Contamination Removal Bars, also known as clay bars remove bonded contamination from paint surfaces that can’t be removed by normal washing.

£ 9.00£ 9.20
Contamination Removal Bar Mild
£9.00 £7.50 (excl. tax)
Contamination Removal Bar Medium
£9.00 £7.50 (excl. tax)
Contamination Removal Bar Heavy
£9.20 £7.67 (excl. tax)
SKU: EC18/20/22 Category:

We have three different grades of contamination removal bar. Essentially they all remove remove bonded contamination from paint surfaces that can’t be removed by normal washing. Tar spots, fall out, bonded traffic film and tree sap. As the bar glides over the paint surface, bonded contaminates stick to the bar and are gently removed from the paint work. If your paint work feels rough after washing, try a contamination removal bar and feel the difference. Orange and Yellow can be used with water making them cost efficient. Our heavy grade Blue clay bar is our most effective, designed generally for full detailing work to quickly and effectively remove contamination. Use this bar with Clay Rider followed by Purple Passion for showroom results.

Directions -Heavy (blue) and Medium (yellow) Contamination Removal Bars:

1. Split the bar in half (retain half in packaging)

2. Knead the bar in your hands to warm it up

3. Flatten bar into a disk shape

4. Spray Clay Rider(clay lubricant) on a square foot of the vehicle at a time

5. Glide the bar back and forth across the well lubricated surface. If bar sticks, apply more clay lube

6. Inspect the bar for contamination

7. Knead the bar and fold it inwards to create a clean surface

8. Repeat on another square foot until the vehicle is complete

Directions -Mild (orange) Contamination Removal Bar:

1. Split the bar in half (retain half in packaging)

2. Knead the bar in your hands to warm it up

3. Flatten bar into a disk shape

4. Spray water on a square foot of the vehicle at a time

5. Glide the bar back and forth across the well lubricated surface. If bar sticks, apply more water

6. Inspect the bar for contamination

7. Knead the bar and fold it inwards to create a clean surface

8. Repeat on another square foot until the vehicle is complete

Please Note:  The use of a Contamination Removal Bar (Clay Bar) will likely result in the requirement for a level of paint correction once all contamination has been removed from a painted surface.

WeightN/A
Density

Heavy, Medium, Mild

Reviews

There are no reviews yet.

Be the first to review “Contamination Removal Bar”

Your email address will not be published. Required fields are marked *

Back to Products